Tutorial Plug-in WordPress SEO by Yoast

So you’re a blogger or content writer for a website/blog built in WordPress but you want help writing articles with search engine optimization (SEO). You do some research and you find WordPress SEO by Yoast is considered one of the best (and free). You install the Yoast plug-in and then go to write a blog post (or page) and you are completely clueless on how to use it. Well, you’re in luck because this is a step-by-step tutorial for writing posts/pages with the Yoast plug-in!
WordPress SEO by Yoast Tutorial

Yoast Color System

The WordPress SEO by Yoast plug-in uses a color coding system to rate how well your blog post (I’ll call everything a post in this tutorial, but the same applies to pages) is doing on the current keyword. The system is based on a stop-light, so it’s quite easy to understand.
  • Grey – You have not selected a keyword yet.
  • Red – The keyword is ranking poorly.
  • Orange – Better than red, but still needs improvement.
  • Yellow – You may want to improve this, but only if it doesn’t hurt your overall post.
  • Green – Everything looks good!
There are a few places that the SEO ranking is displayed.
The Edit Post sidebar – On the righthand side of the Edit Post screen in WordPress there is a Publish widget, in this widget the overall page status is displayed. Your goal is to get a green here.
WordPress Publish Widget
Live/Preview of Post – When you click “Preview” in the Publish Widget or once your post is live on your website, you will see the SEO ranking in your WordPress toolbar at the top of the screen.
WordPress Preview Post
Post Listing – As you look at the list of posts you will see that each one has an SEO color as well as details on the title, meta description and current keyword.
Yoast Plug-in View
Page Analysis – This tab of the Yoast plug-in provides details about how the plug-in has analyzed your post. This screen shot is midway through writing this post.
Yoast Plug-in Page Analysis Tab Tutorial

Step 1: What are you writing about?

Before you even create a new post, you need to answer the question “What are you writing about?” In the case of this example, I’m writing a tutorial on how to use the WordPress SEO plug-in by Yoast. Looking at the topic I can pick out a few keywords:
  • WordPress
  • SEO
  • Yoast
  • Tutorial
Those four words are the essence of what I am going to write about. While it might be tempting to add “how-to” or “plug-in” to the list, you want this list to be short. You will target all of the keywords in the list while writing your post. Sometimes your list is just one or two words long, that’s perfectly fine. I generally recommend once you’ve decided on your keywords that you write them down as a note to have in front of you while working on your blog post.

Google vs Yoast SEO Plug-in

A plug-in which can match the robustness of the google search engine just isn’t going to happen. So, you want to be aware of phrases — because when targeting phrases you have to match the phrase exactly for the plug-in to pick them up. Google can handle more diversity than the Yoast plug-in can (such as “car service” vs “car servicing” would be correctly handled by google, but not the plug-in).
In general for the plug-in I try to avoid using phrases and instead use one word keywords. In this example I put WordPress and SEO as separate keywords, this will make it easier for the plug-in to track them. Also, it can only do one keyword at a time, so I usually start with what I consider the most important keyword. For most of this tutorial I’m using “SEO”.

Step 2: Title, Permalink & Setup Plug-in

Time to create a new WordPress blog post and start writing! Start with your title, which should be between 40 and 70 characters and use your keywords in a coherent manner. In this case the name of the plug-in that I am writing a tutorial is “WordPress SEO by Yoast”, so I include the name directly and then follow it up with Plug-in and Tutorial. The post title is “WordPress SEO by Yoast Plug-in Tutorial”.
The permalink will be automatically generated by WordPress after you finish writing your post title and select the post categories (for a page you should select if the page has a parent page). The permalink that was generated from the title and category I selected:
A portion of the permalink is called a “slug”. This is the very last part, just “wordpress-seo-by-yoast-plug-in-tutorial”. The Yoast plug-in will tell you that this “slug” is too long. It recommends that the slug not exceed 40 characters. So I have removed words that I am not targeting and shortened the slug:
Now that you have your title & permalink it’s time to configure the plug-in on your post to give you some results. Scroll down below the blog entry window to the WordPress SEO by Yoast plug-in window. Enter the keyword that you want to start with (in this case SEO). Then enter a meta description. Your meta description is recommended to be between 120 and 156 characters. You don’t need to make it perfect now, you can always edit it again later. To start the tutorial, I’m entering an “ok” meta description which I will update later. Once you’ve entered everything, click Save Draft in the Publish widget.
WordPress SEO by Yoast start of tutorial

Step 3: Understanding the WordPress SEO by Yoast Plug-in

You’ve just saved your draft and now your SEO is reporting as orange (I’ve specifically set you up with this tutorial to not start with red). Well, that’s because you have no content yet. So let’s go over to the Page Analysis tab of the plug-in and see what it is looking for.
Red (you want to fix these)
  • There are 1 words contained in the body copy. This is far too low and should be increased.
For most writing it is recommended to have a minimum of 300 words. However for certain pages 300 words may not be required. Once you reach 300 words it will become green.
  • The keyword doesn’t appear in the first paragraph of the copy, make sure the topic is clear immediately.
You should put your keywords in the first paragraph/introduction. If your first paragraph is a picture instead of text, try to make sure the keyword is in the picture’s alt text. The Yoast plug-in is actually VERY picky about this.
Orange (you probably want to fix these)
  • The images on this page are missing alt tags.
There are no images yet. Readers generally like images, so the Yoast plug-in wants you to add an image. It also suggests once you have added an image to make sure the keyword is in the alt text.
Yellow (consider addressing these)
  • No outbound links appear in this page, consider adding some as appropriate.
Does your post warrant some outbound links? Since I will be talking about a plug-in, it is a good idea to have a link to that plug-in. Links can also help your SEO from search engines.
  • The meta description is under 120 characters, however up to 156 characters are available. The available space is shorter than the usual 155 characters because Google will also include the publication date in the snippet.
This is pretty self explanatory. Meta description wants to be between 120 and 156 characters. You should determine if this deserves to be changed.
  • The page title contains keyword / phrase, but it does not appear at the beginning; try and move it to the beginning.
If you have multiple keywords only one of them will be able to be at the beginning. Use your judgement here to make sure that the post title is readable and understandable by humans.
  • No subheading tags (like an H2) appear in the copy.
If your post is getting close to that 300 word recommended length, you probably want to break up the post by using subheadings. H2 tags (Heading 2 in the drop down menu of the WordPress editor) are generally recommended to be in the body of a page.
Green (congrats, you did a good job!)
  • The meta description contains the primary keyword / phrase.
Meta description for the tutorial contains the keyword.
  • The page title is more than 40 characters and less than the recommended 70 character limit.
Page title for the tutorial meets Yoast’s guidelines for title length.
  • The keyword / phrase appears in the URL for this page.
This is the “slug” mentioned in step 2.

Step 4: Writing content

Now that everything it all setup, we’ll get to the content writing part of the tutorial! There are a few general guidelines for writing on the web we’ll start with.
  • Keep your paragraphs short. Long paragraphs can be challenging to keep your place as you read. So do your best to keep your paragraphs to 4-5 lines of text.
  • Keep the reading level easy. Frequently people are multi-tasking when they are at their computers, so do your best to keep content easy to read. As you start typing more text into your entry the plug-in will give your writing a Flesch Reading Ease score. You will get green in the plug-in by getting a score of 70 or higher. A score of 60-70 will earn you a yellow. Yellow means a reading ability equal to high school and green middle school. Unless you know your readers are technical people, try to get at least a score of 60.
  • Use standard words. Again, unless you know your audience is very technical, try to avoid overly technical or obscure words. If you use them, you may want to provide definitions or links where people can get more information.
  • Spell out abbreviations the first time. At the beginning of the article I spelled out “search engine optimization (SEO)”. This lets people unfamiliar with the subject understand the abbreviation. You can even link to a site which provides a definition of the term. New people can follow the link, those familiar with the subject just ignore it.
  • Be careful of slang. While much of the internet is in english, not everyone reading your site will have english as their first language. Different countries also have unique slang terms. For example “the boot” can refer to the trunk of a car in England.
  • Spelling is important. For this tutorial and all blog posts we use a WebKit based browser (Google Chrome or Apple Safari). The reason is, WebKit browsers check spelling as you type in both single line text fields (like your post title) and multi-line text fields (like the post content). So you take the help available from WebKit browsers, because I’ve seen major blogs have typos in their titles and it’s rather embarrassing.
Now the moment you’ve waited for in the tutorial, writing! Go ahead and write your first couple paragraphs of text for your WordPress blog post.

Step 5: Reviewing Your SEO As You Go

Great job! You’ve got some content to your post. Perhaps even an image or two. So let’s review how your SEO is doing. The Yoast plug-in has given our tutorial an overall score of green at this point. Once you have the majority of items done, Yoast will score you as green. Here’s a look at this post’s introduction and first section (everything before Step 1):
Red (we should improve):
  • You have not used your keyword / keyphrase in any subheading (such as an H2) in your copy.
As we continue to write the post, we should be sure to use our keywords at least once in a subheading.
Yellow (we should consider these):
  • The page title contains keyword / phrase, but it does not appear at the beginning; try and move it to the beginning.
A different one of our keywords is the first on the page. So we don’t do anything about this.
Green (doing well!):
  • The copy scores 74.4 in the Flesch Reading Ease test, which is considered fairly easy to read.
This is an entry we didn’t have before. A score greater than 70 is our goal most of the time, as that means middle school reading level. This is important as our readers may not speak english as their first language or they may be from another country and be accustomed to different grammar.
  • The keyword / phrase appears in the URL for this page.
This was the “slug” from step 1.
  • This page has 1 outbound link(s).
Outbound links are good — it shows that you play well with others.
  • The images on this page contain alt tags with the target keyword / phrase.
We’ve used the keyword in our alt tag on our image.
  • The keyword density is 2.17%, which is great, the keyword was found 7 times.
A keyword density from 1-4% is our goal. So 2% is doing well.
  • In the specified meta description, consider: How does it compare to the competition? Could it be made more appealing?
We’ve made our meta description long enough, the plug-in is reminding us that we may want to double-check it before we publish our post.
  • The meta description contains the primary keyword / phrase.
This is our meta description from step 1.
  • There are 322 words contained in the body copy, this is greater than the 300 word recommended minimum.
Good work, we’ve written enough content in this tutorial! (It’s our job to make sure it is useful.)
  • The page title is more than 40 characters and less than the recommended 70 character limit.
Our page title for the tutorial is a good length.
  • The keyword appears in the first paragraph of the copy.
It is good to make our point up front.

Step 6: Checking Other Keywords

You’ve written your post, periodically checking your SEO as you go by saving your draft, now it’s time to see if you remembered to include the other keywords that you are targeting. Go to your plug-in and change the Focus Keyword to one of your other keywords. Then press Save Draft in the Publish widget. The plug-in will now update to your new keyword.
Frequently what will happen is that your keyword density will be a little low (or possibly even too high). You can usually look back over the post and find a couple of places where you could add in the keyword (or remove it if too high). I’ve already tweaked this article, so I will just show you the screen shots for my 4 keywords.
While reviewing my post I also noticed that I used the keyword plug-in quite a bit. So I’ve gone ahead and added that to my list of keywords for the tutorial! This is actually a pretty common occurrence to find a new keyword or two as you write. In this case, I’ve updated the WordPress slug to include my new keyword. My new slug is:






keyword yoast




Source : anphira.com

Cara Membuat Category Post List Berdasarkan Label Blogspot

Seotipsku kali ini akan berbagi bagaimana cara membuat category post list blogspot berdasarkan label, atau membuat list postingan per kategori/label secara otomatis berdasarkan postingan terbaru, tentunya akan memudahkan pembaca untuk melihat sitemap daftar isi dari blogspot.

Cara Membuat Category Post List Blogspot :

Langkahnya :
  1. Go to Layout Design > Page Elements/Dashboard
  2. Pilih tata Letak
  3. Click Add A Widget.
  4. In Add A Widget window, select HTML/Javascript.
  5. Masukan Nama Kategori yang ingin dibuat.
  6. Copy the code below and paste it inside the content box.
  7. Click Save.
<!-- Recent Posts by Label Start -->
<!-- code by BloggerSentral.com -->
<script type="text/javascript">
function recentpostslist(json) {
 for (var i = 0; i < json.feed.entry.length; i++)
    for (var j = 0; j < json.feed.entry[i].link.length; j++) {
      if (json.feed.entry[i].link[j].rel == 'alternate') {
var entryUrl = "'" + json.feed.entry[i].link[j].href + "'";//bs
var entryTitle = json.feed.entry[i].title.$t;
var item = "<li>" + "<a href="+ entryUrl + '" target="_blank">' + entryTitle + "</a> </li>";
<script src="YOUR_BLOGSPOT_URL/feeds/posts/default/-/YOUR_LABEL?max-results=YOUR_MAX_RESULT&alt=json-in-script&callback=recentpostslist"></script>
<!-- Recent Posts by Label End --> 

Langkah berikutnya :

  1. Ganti YOUR_BLOGSPOT_URL dengan nama blogspot kamu misalnya http://seotipsku.blogspot.com
  2. Ganti YOUR_LABEL dengan link label kamu misalnya Tips20%SEO.
  3. Ganti YOUR_MAX_RESULT dengan jumlah post yang ingin ditampilkan misalnya 5
Silahkan save dan publish..

Demikian semoga bermanfaat.... Salam Blogger.

Cara Cepat Meningkatkan Alexa Traffic Rank

Bagaimana cara meningkatkan Alexa Rank ?

Inilah Cara Mudah meningkatkan Alexa Traffic Rank

Alexa Traffic Rank akan drastis meningkat jika pengunjung blog anda ramai, itu salah satu kunci untuk meningkatkan Alexa rank tersebut,
Selain pengunjung yang banyak, kita juga harus mengupdate blog secara rutin dan berkala, misalnya dengan membuat postingan 3x dalam seminggu,
Cara Cepat Meningkatkan Alexa Traffic Rank

nah, pertanyaannya adalah

Bagaimana Cara meningkatkan Pengunjung Blog ?

Inti dari permasalahannya adalah cara untuk meningkatkan blog, jika blog ramai maka semua akan terjawab, Alexa Rank akan meningkat dengan otomatis, Blog menjadi lebih SEO friendly,

Baca juga : Cara Mendapatkan Site Link atau How To Link In Alexa

Berikut Tips SEO Killer untuk Meningkatkan Pengunjung Blog

Mendaftarlah di Situs Auto Traffic Exchange, selain kita mendapatkan pengunjung bisa juga untuk ajang promosi blog, bisnis dan yang paling penting untuk meningkatkan Alexa rank blog atau web anda,

Auto Traffic Exchange Terbaik Indonesia ?

Dimana Situs exchange Terbaik Indonesia?
Anda bisa mendaftar disini www.TrafikID.com
Silahkan mendaftar di situs Exchange tersebut secara GRATIS,
Berikut referensi tentang Auto Traffic Exchange Terbaik Indonesia yang sudah sering kami bahas,

Cara Meningkatkan Pengunjung Blog Terbaru dengan Auto Traffic Exchange

Apakah Aman jika Blog memakai Google Adsense atau ADS Lain ?

Kami bisa menjamin bahwa Account Ads anda akan AMAN, tidak ada efek samping kecuali hanya pengunjung blog anda akan meningkat.

Bagaimana Cara mendaftar di TrafikID.com ?

Cara mendaftar di TrafikID.com sangat mudah, tidak butuh waktu berjam - jam, silahkan baca pada postingan berikut
Cara Mendaftar di Situs Exchange Indonesia

Apa Buktinya Kalau TrafikID.com Berhasil Meningkatkan Alexa rank dan Pengunjung Blog?

Anda bisa lihat sendiri pada blog SEO Killer Ini, serta dengan komentar - komentar yang masuk.